manualshive.com logo in svg

Nokia 30 GSM, At Command Manual

Share
Download
Nokia 30 GSM At Command Manual Download Page 60

 

 

 

53/107  

9.  ME ERROR COMMAND (GSM 07.07) 

9.1  +CMEE REPORT MOBILE EQUIPMENT ERROR 

 

Command Response  Default 

Set 

+CMEE=<n>  

0 

Read 

+CMEE? +CMEE: 

<n> 

 

Test 

+CMEE=? +CMEE: 

(0-

1

)  

 

The +CMEE command disables or enables the use of the result code +CME ERROR: <err> 
as an indication of an error relating to the functionality of the Nokia 30. When enabled, the 
ME-related errors return the +CME ERROR: <err> final result code instead of the regular 
ERROR final result code. ERROR is returned normally when an error is related to the syntax 
or invalid parameters. 

The test command returns the supported values. 

 

Defined values 

<n>: 

0 

dCME ERROR: <err> result code and use ERROR 
instead 

1 

CME ERROR: <err> result code and use numeric <err> 
values 

 
See also the result code +CME ERROR in Chapter 15.3.10. 

Summary of Contents for 30 GSM



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands