manualshive.com logo in svg

Nokia 30 GSM, At Command Manual

Share
Download
Nokia 30 GSM At Command Manual Download Page 13

 

 

 

6/107  

4.  TE-TA INTERFACE COMMANDS 

4.1 V.25TER 

4.1.1  S3 Command line termination character 

 Command 

Response 

<n> 

values 

Set 

S3=<n>  

0..127 

(default 

13) 

Read 

S3? <n>  000..127 

 

The S3 command sets the decimal IA5 value of command line termination used by the DCE 
as a part of the header, trailer and terminator for result codes and information text, along with 
the S4 parameter (see the description of the V command for usage). 

If the value of S3 is changed on a command line, the result code issued in response to that 
command line will use the new value of S3. For example, if S3 was previously set to 13 and 
the command line “ATS3=50” is issued, the result code issued will use the character with the 
ordinal value 50 (IA5 3/2) in place of the CR. 

4.1.2  S4 Response formatting character 

 Command 

Response 

<n> 

values 

Set 

S4=<n>  

0..127 

(default 

10) 

Read 

S4? <n>  000..127 

 

The S4 command sets the decimal IA5 value of the character generated by the DCE as a 
part of the header, trailer and terminator for result codes and information text, along with the 
S3 parameter (see the description of the 

V

 command for usage). 

If the value of S4 is changed in a command line, the result code issued in response to that 
command line will use the new value of S4. 

4.1.3  S5 Command line editing character 

 Command 

Response 

<n> 

values 

Set 

S5=<n>  

0..127 

(default 

8) 

Read 

S5? <n>  000..127 

 

Summary of Contents for 30 GSM



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands