Nokia 2116i, User Manual

Page: 40 / 201

M e s s a g e s
39
Set up voice mail with dialing codes
1. In the standby mode, select Contacts > 1-touch dialing .
2. Scroll to an empty 1-touch dialing slot, and select Assign .
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes, and enter codes as necessary using the information
that you saved from "Voice mailbox number and process," page 38.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number (for example, 2145551212pp).
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK .
6. Enter a name (such as voice mail), and select OK .
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
■
Picture messages
Picture messaging is a network service. If your wireless service provider supports
this feature, your device comes with five preloaded pictures. You can, however,
over-write any of the five pictures that come with your device. Pictures can be
attached to a message and sent using text messaging to compatible devices or
PCs. Picture messages behave the same as text messages, but pictures take up
more space than text. Pictures are stored in the templates folder at
Menu >
Messages > Text messages > Templates .
Note: Picture message function can be used only if it is supported by your
network operator or service provider. Only compatible devices that offer picture
message features can receive and display picture messages.
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Write and send
When a picture is added to a text message, the message converts to picture message.
The message counter in the upper right of your display shows the characters
available for you to type in.
1. In the standby mode, select Menu > Messages > Text messages > Create
message > Text > Edit message .
2. Write a message using the keypad (or enter nothing if you choose to just send
a picture), and select Options > Insert picture .