Nokia 100i, Installation Manual

Page: 34 / 72

3
Performing the Initial Configuration
34 Nokia 100i Installation Guide
Table 4 System Status LEDs for the Nokia 100i Gateway
Connecting Network Interfaces
The Nokia 100i gateway supports the following for network communication:
One built-in four-port 10/100 Ethernet management interface; supports up to
six additional network interfaces (for a total of ten). The Nokia 100i also
supports a dual Gigabit Ethernet card (10/100/1000 Base-T), a dual Fiber
Gigabit Ethernet card, and a four-port 10/100 Ethernet card.
Note
In the Nokia 100i gateway, you cannot use two PMC four-port 10/100
Ethernet NICs at the same time. However, you can use one PMC four-
port 10/100 Ethernet NICs in combination with any other NIC that the
Nokia 100i supports.
LED Description
Steady blue: Power on.
Steady yellow: Unit is experiencing an internal voltage
problem or unit is booting.
Blinking yellow: Unit is experiencing a temperature
problem.
Steady red: One or more fans are not operating properly.
or
There is a DC voltage problem.
!!
!!