background image

9

Copyright © 2009 Nokia. All rights reserved.

To mute or unmute the microphone, 
press the middle of the volume key. 
When the microphone is muted, the 
green indicator light flashes twice 
about every 5 seconds.

To switch a call from the headset to 
a compatible device, press and hold 
the answer/end key for about 2 
seconds, or switch off the headset. 
To switch the call back to the 
headset, press and hold the answer/
end key for about 2 seconds, or 
switch on the headset.

Turn lights on or off

By default, the indicator lights are 
on in all situations. To turn the 
lights off in some situations (for 
example, during a call or when the 
headset is connected to a mobile 
device) or back on, press and hold 
the power key and the answer/end 
key for about 2 seconds when the 
headset is connected to a device.

Turning the lights off increases the 
standby time.

Clear settings or reset

To delete the pairings from the 
headset when it is switched off, 
press and hold the power key and 
the answer/end key (for about 

6

 

seconds) until the red and green 
indicator lights start to alternate.

To reset the headset if it stops 
functioning, even though it is 
charged, connect the headset to a 
charger while you press and hold 
the power key. The reset does not 
clear the pairing settings.

Troubleshooting

If you cannot connect the headset 
to your compatible device, check 
that the headset is charged, 
switched on, and paired with your 
device.

Summary of Contents for 02719B5













Reviews: