6
SETTINGS
Connection settings
Use Mekuwin program to configure the device. You can download Mekuwin from Nokeval’s web
site for free.
Default communication settings for configuration:
• Baud rate 9600
• protocol SCL
• address 0
Menu
Serial submenu (Ser)
Serial communication settings. Note that the changes here do not take effect until the device is
rebooted.
Address
SCL address selection. Allowed addresses are 0...123.
Baud
Baud rate selection. Options are 300, 600, 1200, 2400, 4800, 9600 and 19200.
Receive submenu (Rcv)
CRCChk
If selected, CRC checksum of received data packets is checked and corrupted packets are
rejected. The setting is on by default and there is no reason to disable the setting.
CH1ID..CH4ID
Four MTR series transmitters (except MTR260) can be defined to act as certain channel. For
example, when FTR970 receives ”MEA CH 1?” command it sends latest received data from the
transmitter that has been assigned to channel one. To assing a device to channel one, set the
transmitter’s ID to CH1ID value. Other channels can be assigned in the same way.
Conf
Ser
Rcv
Rcv
CRCChk
CH1ID
Ser
Addr
Baud
CH4ID
CH3ID
CH2ID
