![Nodis PRONTO DELUXE User Manual Download Page 11](http://html1.mh-extra.com/html/nodis/pronto-deluxe/pronto-deluxe_user-manual_1698817011.webp)
USER MANUAL
11
www.nodis.it
PRONTO DELUXE
How to use whisk
1. Turn the whisk onto the motor unit at anti-clockwise until it is locked.
2. Plug in the appliance.
3. Two speeds set for mixing eggs or creams etc. In operation, please take your long hair or
scarves etc. hanging down over the rotating whisk to avoid any damage to you.
4. After using it, please do not press the switch to avoid liquid ingredient splashed to make your
clothes or table dirty.
5. Operate whisk each time for not more than 1 minute, otherwise the motor will be burnt if it is
performed long time.
6. Always unplug it after your using or cleaning.
How to use chopper
1. Place chopping blade on the center pin of chopper bowl. Always place the chopper bowl on the
anti-slip pad.
2. Fill in the food in chopper bowl, such as meat, cheese , onions, herbs, garlic, carrots almonds,
prunes etc..
3. Put the chopper cover on the chopper bowl, Locate motor unit onto the chopper cover, and
plug in.
4. Press the switch to operate the chopper. During the processing, hold the motor unit with on
hand and other for chopper bowl.
5. After use, unplug it and take the motor unit from chopper cover; then remove the chopper
cover.
6. Carefully take out the blade. Handle the blade with care because it is sharp!
7. Remove the processed food from the chopper bowl.
CAUTION: Chopping time does not exceed more than 1 minute each time, and food quantity is
under 500g.
How to cleaning
1. Before carrying out any cleaning operation, disconnect the plug from the outlet and wait for
the appliance to cool down completely.
2. Clean the body of the appliance with a damp cloth. Do not immerse the motor unit in any
liquid. Never immerse it into water.
3. Clean the bowl under running water, but do not immerse it in water.
4. Wash the accessories with water and dishwasher detergent just after using them, without
leaving them in water long time. Dry them thoroughly. Take care of the blades because they are
too sharp!!
5. Make sure all the parts of the appliance are completely dry before reassembling them.