·
6 Troubleshooting
6.1 Troubleshooting Flowchart
6.2 Troubleshooting
LED does not light up after the AP is powered on
1)
If you use PoE power supply, verify that the power source is IEEE 802.11af compliant, and then verify that the cable
is connected properly.
2)
If you use a power adapter, verify that the power adapter is connected to an active power outlet, and then verify that
the power adapter works properly.
Ethernet port is not working after the Ethernet port is connected
Verify that the device at the other end of the Ethernet cable is working properly. And then verify that the Ethernet cable is
capable of providing the required data rate and is properly connected.
Wireless client cannot find the AP
The
device
does not work
normally after installation
Check that the
device
is correcly
installed
Check that the power cables are
correctly connected
Check that the
LED
indicator is
normal
Check that the serial port is
correctly connected & the
parameters are set
Check that the optical fibers or
cables are correctly connected to
the ports
Contact Nodexon Customer
Service Department for any
hardware fault
