13
2.
Install the two L-shaped brackets in the accessories on both sides of the switch panel and fix
them with the screws provided in the accessories.
3.
Place the switch in the proper position in the rack and support it by the bracket. Fix the L-
bracket to the guide groove fixed at both ends of the rack with screws to ensure that the
switch is installed on the rack stably and horizontally.
Note:
Good grounding of the rack is an important guarantee for anti-static, anti-leakage, lightning
protection and anti-interference of the equipment. Therefore, ensure that the grounding wire of
the rack is properly installed.
The equipment installed in the rack is generally from bottom to top to avoid overload installation;
Avoid placing other heavy objects on the surface of the switch to avoid accidents;
Ensure heat dissipation and air circulation.
3.3 login management interface
Step1
Connect the network cable to the computer
Step 2
Change the computer IP to 192.168.254.X (2~254), and the Subnet mask is 255.255.255.0
