Smart Gas Detector / S2B-300
28
E. Self-Diagnosis Error Code
Smart Safety Ball performs self-diagnosis and automatic calibration after
entering the detection mode, and transmits the error code to the surrounding
area if any problem occurs during self-diagnosis. When the dedicated app
receives self-diagnosis error code, the error code received will be displayed
on the app screen as shown in the following figure. Possible error codes and
causes are as shown in the following table.
Error
Code
Possible Error and Causes
E0
Sensor damage or error of
electromagnetic interference
E4
Oxygen(O
2
) sensor related errors
E5
Carbon
monoxide(CO)
sensor
related errors
E6
Hydrogen
sulfide(H
2
S)
sensor
related errors
- If self-diagnosis error occurs, turn off the device and turn int on again.
- If the problem persists, contact NodeTalks Corp.
E-mail:
Website:
www.nodetalks.co.kr