NOCO Genius 7211368 Installation And User Manual Download Page 9 | Manualshive

Page: 9 / 28

NOCO Genius 7211368 Installation And User Manual Download Page 9

9

TO TEST THE NoCO ALARMS ARE CORRECTLY

“PAIRED” AND HAVE CREATED A NETWORK

Note: This test will confirm the pairing of the units into a network, but will not switch off the
boiler.

A: Testing the NoCO alarms:

In order to be able to see the Control Unit indicators at the same time as pressing the test
button on the NoCO alarms, it is likely you will need two people to perform this operation.

1.  Place the NoCO alarm onto its baseplate.
2.  Press the test button on the NoCO alarm.
3.  All paired NoCO alarms will sound a pattern of 2 x 4 short beeps and the Alarm LED (red)

on the NoCO alarm will flash.

4. The Alarm LED (red) on the NoCO Control Unit will flash for 60 seconds. If the Alarm

LED on the NoCO Control Unit does not flash, the alarms have not been paired. Please
repeat the “pairing” procedure above.

B: Testing the NoCO Control Unit:

In order to be able to see the Control Unit indicators at the same time as pressing the test
button on the NoCO alarms, it is likely you will need two people to perform this operation.

If the NoCO alarm and/or NoCO Control Unit does not test:

1. Check the NoCO alarm operation as indicated in the Installation and User Guide.
2. Check troubleshooting guides in both product user guides.
For assistance, please contact your Gas Safe registered installer. If you are unable to resolve
the issue, call the NoCO Technical Helpline on

0844 241 2504

or see further information at

www.no-co.co.uk

«
...
7
8
9
10
11
...
»

Summary of Contents for 7211368





























Reviews:

No comments