NOCO Genius 7211368 Installation And User Manual Download Page 4 | Manualshive

Page: 4 / 28

NOCO Genius 7211368 Installation And User Manual Download Page 4

4

INTRODUCTION

Please keep this user guide in a safe place. If you move house, please hand it to the next
occupier.

The NoCO Carbon Monoxide Protection System is designed for use with gas or oil fired
domestic boilers.

When installed and interlinked with a NoCO Control Unit, as part of the NoCO Carbon
Monoxide Protection System, this wireless carbon monoxide alarm will provide additional
safety and peace of mind for you and your family.

The carbon monoxide alarm will not only alert you with a loud audible signal in the event of a
dangerous carbon monoxide leak but will also activate all other interlinked carbon monoxide
NoCO alarms to signal the alarm. In addition, a wireless message will switch off your boiler
in the event of a carbon monoxide leak for ultimate protection from this poisonous gas.

Installing a NoCO Room Alarm is ideal where the boiler is the only fuel burning
appliance in the property.

See “Interlinking (Pairing) NoCO Carbon Monoxide Alarms”, page 6 for further information
about when it is recommended to interlink NoCO Room Alarms into a wireless network.

Other Carbon Monoxide system components from NoCO:

Order Code:

7211367 Wireless Carbon Monoxide Void Alarm

Order Code:

7211366 Carbon Monoxide System Control Unit

«
...
2
3
4
5
6
...
»

Summary of Contents for 7211368





























Reviews:

No comments