Nobu GR-10L, User Manual

Page: 18 / 64

18
OPERATING THE UNIT
Removing the collected water
There are two ways to remove collected water.
1. Use the bucket
• When the bucket is full, the unit will automatically
stop running, and the Full indicator light will flash.
• Slowly pull out the bucket. Grip the left and right
handles securely, and carefully pull out straight so
the water does not spill. Do not put the bucket on
the floor because the bottomof the bucket is uneven.
Doing so will cause the bucket to fall and the water to
spill.
• Throw away the water from the water outlet (See
Fig.7) and replace the bucket. The bucket must be
in place and securely seated for the dehumidifier to
operate.
• The machine will re-start when the bucket is re-
stored in its correct position.
NOTES: When you remove the bucket, do not touch
any parts inside of the unit. Doing so may damage
the product. Be sure to push the bucket gently all the
way into the unit. Banging the bucket against any-
thing or failing to push it in securely may cause the
unit not to operate. When you remove the bucket,if
there is some water in the unit you must dry it .
1. Pull out the bucket a little.
Cut the cover down
2. Hold both sides of the bucket with even
strength, and pull it out fromthe unit.
Fig. 5
Fig. 6
3. Pour the water out.
Fig. 7