2. If the remote is lost or damaged, the system can also be disarmed by using
the valet switch. Turn the ignition to the ON position and press the valet switch
for five seconds or five times depending on the valet switch setting that has been
programmed. The systems default setting is five seconds.
User Selectable Quiet Mode
Your security system has the ability to be armed and disarmed silently (no siren
chirps / horn honks). To place the security system into quiet mode, press
and
simultaneously on the remote control for three seconds. The
parking lights will flash once to indicate you have placed the system into quiet
mode. You may then arm and disarm the system silently by pressing
on the
remote control.
Quiet Mode does not effect the Panic feature.
To take the security system out of quiet mode, press
and
simultaneously on the remote control for three seconds. The parking lights will
flash twice to indicate that you have placed the system into normal operating
mode. You may then arm and disarm the system by pressing
on the
remote control.
Valet Mode
Valet mode is used to prevent the security system from arming. The security
system should be placed into valet mode when the vehicle is being serviced. It
may also be used as a manual disarm, in the event of loss or damage to the
remote control. It should be noted that convenience features such as keyless
entry and trunk release will continue to function via the remote control even if
USING YOUR SECURITY SYSTEM
Arming
1. To arm the system manually, press
on the remote control once. The
siren (horn) will chirp once and the parking lights will flash one time. If installed,
the vehicle's doors will lock.
2. Automatic passive arming: After the doors have been closed, the LED
indicator will flash rapidly for thirty seconds. At the end of thirty seconds, the
system will arm, chirp the siren (horn) once and flash the parking lights once. If
installed, the vehicle’s doors will lock. NOTE: Passive arming is a selectable
feature that may be turned ON or OFF by your authorized dealer/installer.
After the security system is armed, the LED indicator will flash approximately
once every second to indicate that the system is actively protecting your vehicle.
With the security system armed, your vehicle is protected in the following
ways:
• Light impacts will result in the parking lights activating and a three chirp pre-
warn siren blast.
• Heavy impacts will result in the siren and parking lights activating for the
programmed alarm duration. The alarm comes set at the thirty-second alarm
duration, but can be programmed for sixty seconds.
• If a door is opened, the system will activate immediately resulting in the siren
and parking lights activating for the programmed alarm duration.
• Turning on the ignition will trigger the security system.
• If the optional start disable system is installed, the vehicle’s starter will be
prevented from cranking.
If you inadvertently trigger the security system, you can at any time disarm the
security system by pressing
on the remote control.
NOTE
: If any entry points (doors, hood, trunk) are not closed when arming, the
siren will chirp three times to indicate an open zone.
Disarming
1. To disarm the system, press
on the remote control. The siren (horn) will
chirp twice and the parking lights will flash twice. If installed, the vehicle’s doors
will unlock. Also, if installed, the interior lights will turn on and stay on for twenty-
five seconds or until you turn on the ignition.
NOTE: If the siren chirps four times, this is an indication that a zone has been
violated. See
Security Zone Intrusion Memory
.
2
3
Button 3:
Trunk Release
Button 4:
Panic
Button 1:
Lock / Unlock
Button 2:
Option
