NOBOCOOL NTL4S 07, Instruction Manual

Page: 7 / 14

1.
Parts Installation
WARNING -
Minimum clearances and IP zone requirements must be adhered to.
Do not locate the appliance immediately below or in front of a fixed socket
outlet or connection box.
WARNING:
This heater must not be connected to the electricity supply via an
external switching device (such as a timer) or circuit that is regularly switched
on and off by the utility supplier. Failure to follow this warning could result in
the heater’s thermal cut-off being inadvertently reset and could create a fire
hazard. Cables/flexes that are supplied pre-fitted to the product must
NOT
be
extended.
IMPORTANT -
The wall bracket supplied with the heater must be used when
wall mounting, and the heater must be installed in the correct orientation (not
sideways). The fixings should be used to secure the bracket to the particular wall
on which the heater will be installed. The heater should be positioned observing
the minimum stated clearances around the heater.
When wall mounting, this heater must be mounted on a vertical wall. It also
must not be mounted on the ceiling.
This product is not suitable for use/installation in drying rooms, cupboards, or
similar.