8
COMMISSIONING
Distance adjustment and eye defects compensation
In order to be possible to observe an object at different distances equally
clearly and with high contrast, it is necessary to set the spotting scope to
the appropriate distance. While observing the object, the focus wheel (1)
should be turned to the right or to the left until the clearest and most con-
trasting observation is achieved. Thus, even eye defects of up to ±6 diopters
can be compensated.
Adaptation of the eyecup
In case of these models, they are models for people who wear glasses. The
normal-sighted observer turns outwards the eyecup (2) up to the stop.
People who wear glasses use the spotting scope with the eyecup turned
inwards, in order to use the full visual field.
Magnification change
Depending on the subject distance and light conditions, the appropriate
magnification can be easily adjusted by turning the magnification ring (3)
up to 120°. For better orientation, the most important magnification values
are engraved on the tube, whereby any intermediate magnification can be
infinitely adjusted while maintaining the same image quality and acuteness
of vision.
Connection for a tripod
The device can be used handheld due to its low weight or it can be mounted
on a standard tripod with the help of the existing connection thread of ¼“ (4).
Eyepiece connecting
The spotting scope is provided with an eyepiece-connecting thread of
M36x0.75-6h, length 6.5 mm and thus it is easily interchangeable by a
suitable eyepiece. With a compatible adapter, a smartphone can be quickly
and easily connected to the spotting scope and can be used as a camera for
digiscoping.
