OPERATION
Speedshine
t
1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (12--04)
9
STORING MACHINE
1. Remove brush/pad driver from machine and neatly
coil cord around cord hooks on handle.
2. Store machine in a dry area in the upright position.
WARNING: Electrical Shock Hazard.
Do Not Use Outdoors. Do Not Expose to Rain.
Store Indoors.
RECOMMENDED STOCK ITEMS
Refer to the Parts List Manual for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
Machine does not
t
Faulty power cord.
Contact Service Center.
operate.
Tripped circuit breaker.
Reset circuit breaker on machine.
Tripped building circuit breaker.
Reset circuit breaker in building.
Faulty machine wiring.
Contact Service Center.
Faulty ON/OFF twist grip switch.
Contact Service Center.
Faulty motor.
Contact Service Center.
Capacitor burned out (Single speed models). Contact Service Center.
Rectifier burned out (Dual speed models).
Contact Service Center.
Machine operates
ith
bbl
j k
Soiled Pad.
Replace Pad.
with a wobble or jerky
motion.
Improper pad/brush for application.
Change to proper pad/brush.
motion.
Pad driver/brush not installed correctly.
Remove and reinstall pad driver/brush.
Pad/brush unevenly worn.
Replace pad/brush.
Pad not properly centered on pad driver.
Remove and reinstall pad.
Machine circuit
b
k t i
Heavily soiled pad/brush.
Clean or replace pad/brush.
breaker trips
continuously.
Improper pad/brush for application.
Change to proper pad/brush.
continuously.
Defective circuit breaker.
Contact Service Center.
Worn carbon brushes in motor.
Contact Service Center.
