OPERATION
Speed Scrub
t
2701/3301 (06–01)
8
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1.
Adjust control grips to a comfortable operating
height (three settings). Squeeze two levers
together, located under console, to raise and lower
control grips (Figure 11).
FIG. 11
2.
Lower squeegee. Depress thumb lever on
squeegee lift lever to lower (Figure 12).
FIG. 12
3.
Lower scrub head. Depress top brush lift foot
pedal forward to lower (Figure 13).
FIG. 13
4.
Turn on the MAIN, VACUUM and BRUSH
switches.
NOTE: The brush motors will not start until control
grips are rotated.
5.
Activate solution flow. Push solution flow lever
slightly forward to activate. The further the lever is
pushed forward the more solution will flow. Push
completely forward for maximum flow. Solution will
immediately begin to flow once lever is activated
(Figure 14).
FIG. 14
NOTE: To increase or decrease the maximum solution
flow, turn solution flow adjustment knob. Turn knob
clockwise to decrease solution flow or
counterclockwise to increase (Figure 15).
FIG. 15
6.
Slowly rotate control grips forward to begin
scrubbing. The machine will continue to gain
speed the further you rotate grips. To drive
machine in reverse; simply rotate control grips
backwards.
