14
c. Lifting
DO NOT OVERLOAD THE TRUCK! THE MAXIMUM CAPACITY IS 3086 lbs.
LIFT ONLY CAPACITIES ACCORDING TO THE RESIDUAL LIFT DIAGRAM.
Tra
vel with the lowered forks fully underneath the pallet and move the lifting cam towards you until you
reached the desired lifting height. The lifting speed can be adjusted by the movement of the cam.
d. Lowering
If the forks are in the racking, firstly travel out of the racking carefully with or without the pallet.By
travelling out of the racking, take care that the forks are not touching the racking.
Move the lifting cam(fig. 7, 24) to the “lowering position“carefully.
The lowering speed can be adjusted by the movement of the cam.
Lower the load until the forks are clear of the pallet, then drive
the truckcarefully out of the load unit.
e. Moving forks
Push button (28) with the moving forward logo, the reach
pantograph moves out of the truck.
Push button (28) with the moving backwards logo, the reach
pantograph moves back into the truck.
f. Fork tilting
Push button (25) with the fork upside logo, the forks moving upwards.
Push the button (25) with the forks downside logo, the forks moving downside.
Fig.10: Load facing uphill
