11
Side or end load. Load must be distributed evenly on the forks.
Use the truck with unstable, unbalanced not stable load.
Use truck without manufacturer
’
s written consent.
Lifted loads could become unstable at wind forces. In the case of wind forces do not
lift the load if there is any influence to the stability
Watch difference in floor levels when driving. Load could fall down or thetruckcould get uncontrollable.
Keep watching the condition of load. Stop operating the truck if load becomes unstable.Brake the truck
and activate the emergencybutton (3) by pushing when sliding load on or off thetruck. If thetruck has any
malfunctions, follow chapter 8.
Practice maintenance work according to regular inspection.This truck is not designed to be water
resistant. Use thetruckunder dry condition.Prolonged continuous operation might cause damageof the
power pack.Stop operation if temperature of hydraulic oil is too high.
When operating the truck, the operator has to wear safety shoes.
Thetruck is intended to be used for indoor applications with ambient temperatures
b5
C and + 40
C.
The operating lighting must be minimum 50 Lux.
It is not allowed to use the truckon ramps.
To prevent unintended sudden movements when not operating the truck (i.e. from
another person, etc.) switch off thetruck and remove the key.
4. COMMISSIONING, TRANSPORTING,DECOMMISSIONING
a.
Commissioning
Table 2: Commissioning data
Type PS
30RP
Commissioningweight [lbs]
5357
Version/ Lift [in]
157
Dimensions [in]
101x162x83
After receiving our new truckor for re-commissioning you have to do following before (firstly) operating
the truck:
Check if are all parts included and not damaged
Eventually installation and charging the batteries (follow chapter
7)
Do the work according to the daily inspections as well as
functional checks.
b.
Lifting/ transportation
For transporting, remove the load, lower the forks to the lowest position
and fix the trucksafe with dedicated lifting gear according to the
following figures.
