8
MAIN COMPONENTS DESCRIPTION
Control panel (1)
--This panel is the control part of the machine, see the description of control and switch.
Handle (2)
-- Hold this handle and operate the machine through it.
Recovery tank lid (3)
--
This lid seals the recovery tank. When cleaning the recovery tank, it can be taken off and
hanged on the fill-port.
Recovery tank (4)
-- This tank stores sewage sucked up by squeegee.
Hinge (5) --
This hinge connects solution tank and recovery tank.
Solution tank (6)
-- This tank stores solution/clean water.
Brush disk cover (7)
-- This brush cover mounts brush disk, pad driver and the brush motor.
Brush disk/ Pad driver (8)
-- A brush disk or a pad driver with a polishing pad can be installed on the machine.
Load wheel (9)
-- This wheel carries the weight of the machine.
Solution tank level hose (10)
--This hose indicates the level of water in the solution tank.
Caster (11)
-- This caster turns the machine.
Recovery tank drain hose (12)
-- This hose drains dirty water from the recovery tank.
Squeegee vacuum hose (13)
-- This hose transfers sewage from the squeegee to the recovery tank.
Squeegee adjusting knob (14)
-- This knob adjusts the angle of the squeegee to be well-matched with the ground
and the sewage can be well-sucked.
Squeegee fixing knob (15)
-- This knob connects and fixes the squeegee to the machine.
Squeegee assembly (16)
--This squeegee collects the dirty water after washing.
Squeegee lift/lower foot pedal (17)
--This pedal lifts/lowers/presses the brush disk.
Squeegee lifting lever (18)
-- The lever lifts or lowers the squeegee.
Charging socket (19) --
This socket is used to charge the battery.
Float shut-off screen (20)
--
Keep this part clean or the vacuum motor will be clogged.
Float shut-off screen holder (21)
-- This fixes the floating shut-off screen.
Solution tank fill-port (22)
-- This port makes filling water/ detergent (low-foam type) easier to the solution tank.
Solution tank filter (23)
-- This filter prevents the dirt into the solution tank.
Draining electromagnetic valve (24)
-- This valve controls the flow of water and the output.
Filter (25)
-- This filter filters the solution liquid before supplying to the brush.
Solution tank drain tap (26) --
This tap is used for emptying the solution tank.
Solution tank water tap (27)
-- This tap is used for turning on/off the solution liquid.
Battery (28)
--
This battery supplies power for the operation of the machine. The optional battery must be 24V.
Identification plate (29)
-- This ID plate indicates the data of the machine.
Tank rope (30)
-- This rope helps holding the open recovery tank.
Vacuum pressure plate (31)
-- This plate fixes the filter sponge and protects the vacuum pump.
Balance adjusting knob (32) --
This knob is used to adjust the horizontal balance of the brush disk/ pad driver to
prevent shaking.
Brush angle adjusting knob (33) --
This knob is used to adjust the angle of brush disk/ pad driver, which influence
the machine speed.
Battery indicator/ fault code display (34) --
This display indicates the battery charge level and fault codes.
Vacuum motor indicator (35) --
This indicator light indicates the working state of the vacuum motor.
Vacuum motor button (36) --
This button is used for turning on/off the vacuum motor.
Brush/pad driver indicator (37)
-- This indicator light indicates the working status of the brush motor.
Brush/pad button (38) --
This button is used for turning on/off the brush motor.
Brush/pad removal button (39) --
Long press this button to automatically release the brush disk/ pad driver.
Brush/pad removal indicator (40) --
This indicator light indicates the working status of the automatic brush
removal switch.
