manualshive.com logo in svg

Noble HT-180 HH, Installation, Operation And Service Manual

Share
Download
Noble HT-180 HH Installation, Operation And Service Manual Download Page 48

07610-004-26-29-E

41

PARTS

MOTORS — WASH HEATERS — RINSE HEATERS

The models covered in this manual come supplied with various wash motor assemblies (a wash motor assembly includes 
the wash motor and the pump end), depending on the characteristics of the machine. To ensure that the correct wash 
motor assembly is ordered for the model being serviced, refer to the following table: 

MODEL

VOLTS

Hz

PHASE

WASH MOTOR 

ASSEMBLY

NOBLE HT-180 HH

415

50

3

06105-002-45-07

NOTE: 

When servicing a wash motor please refer to the wiring schematic found on the motor to ensure that it is wired 

correctly. Different manufacturers use different wire color codes and your new motor may not connect using the same 
wires. Always refer to the diagrams on the motor you are installing. If the schematics have been removed from the motor 
you are installing, contact Noble Warewashing technical support immediately. 

Summary of Contents for HT-180 HH













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands