Place the Loveseat onto a flat, level surface.
Then EXERT pressure, floorwards onto the Loveseat with both hands.
This pressure will help the Loveseat reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts at all joints until evenly secured.
Inspect the Loveseat and make sure all parts are adequately connected.
Adjust the Levellers until the Loveseat is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the
Loveseat while you are working.
Place Seat Cushion (H) and Back Cushion(G) onto the Loveseat.
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Loveseat is ready to be used.
Caution: This Loveseat can only be used on a flat, level surface.
Step 8
G
H
Step 7
Adjust Pre-installed Levellers
height for balance
Noble House Home Furnishings LLC
Page 7 of 8
