TO MAINTAIN PEAK PERFORMANCE THE COIL HEAD NEEDS TO BE REPLACED PERIODICALLY.
Its life time depends on the usage and the e-liquid’s composition.
When a decrease in the amount of vapor and/or a tainted taste is noticed, while using a recently charged
battery, it may be time to replace the atomizer head.
For sanitary reasons, frequently wash the detachable mouthpiece with warm water.
If you notice any humidity on the base of the mouthpiece, use a clean piece of paper to absorb it.
NOBACCO STREAM FUNCTIONS
:
When attaching the atomizer STREAM will ask for coil type. Press power button if the coil head is the same or
choose appropriate coil type (Ni-Ti-SS) for temperature control functions with +.- buttons.
Adjust WATT
: In wattage operation long press + or – for one second. Screen will flash and allow you to adjust
WATT with +.- buttons.
Temperature Control Mode (T.C. Mode)
: Long press power and + buttons for 3 seconds to choose the T.C.
Mode according to coil head type (Ni-Ti-SS).
To adjust temperature long press + or - for one second. Screen will flash and allow you to adjust temperature
with +. - buttons. To adjust power while in T.C. Mode long press power and - button until wattage indicator starts
flashing. Adjust by pr or - buttons.
Use
:
Screw the atomizer onto the device without using
excessive force. Press 3* times the power button to
activate the device and then inhale gently while
pressing the power button of the device. Press 3* times
the power button to deactivate the device.
For peak performance, you are advised to press and
leave the power button one (1) second prior starting
and ending your inhalation.
The air flow control allows you to adjust the air intake
according to your preference.
CAUTION
When inhaling, Airflow control system must never be
fully closed in order for the atomizer to be able to
perform properly. Otherwise e-liquid may squirt in the
coil head causing malfunction.
OLED Display Screen
Power-On/Off
Button/Make Selection
Micro USB Cable Plug Port
(+) Button: Increase Temperature/Wattage/Cycle Selection
(-) Button: Decrease Temperature/Wattage/Cycle Selection
