18
B. Interface Configuration
1. General setup Tab
ESSID:
Input SSID name
Mode:
The drop box selection shows the available Modes the NLT Bolt
Operates. See image below.
Note: Configuration of most the common application, Access Point will
be used in following section. For advanced configuration contact your
NLT representative.
VLAN Membership:
Select from the list of pre-created VLANs. This
associates the SSID to a corresponding VLAN
Enable Set the DTIM Period:
T
he period to wake up wireless clients
from Sleep Mode. For voice application it is recommended to be set to 1
Maximum number of Stations allowed:
Limits the amount of a active
connections to the access point, set to 255 by default.
Hide ESSID:
Tick to hide/show SSID. Most applications will show the
SSID but hiding it may add a layer of security.
Note: To apply changes click Save & Apply or for many changes click
Save and after finishing all the changes click save & Apply (at the bottom
of the screen)
2. Wireless Security Tab
Encryption:
The drop box selection shows the available type of
encryptions available. See image below:
