NKT Photonics SuperK CONNECT, Product Manual, Page: 3 / 40

3
GUIDE OVERVIEW
This product guide is intended to provide functional, operational and installation
information for the SuperK Fiber Delivery System and specifically the CONNECT
adapter. The guide includes information that covers the Fiber Delivery System
component descriptions, installation, and adjustment.
Warning: Do not operate a SuperK laser before first reading and understanding
all warnings, cautions and handling information stated within its associated docu-
ment:
SuperK {Model Name} Safety Handling and Regulatory Information
The paper copy of this guide is included with your laser; it can also be
downloaded from:
https://www.nktphotonics.com/lasers-fibers/support/product-manuals/
Documentation
A USB memory stick is included with your SuperK laser. It contains
documentation for all NKT Photonics products including this accessory.
Terminology
The guide may refer to the SuperK CONNECT as just the CONNECT and a Fiber
Delivery collimator with fiber may be referred to as an FD. Both the CONNECT
and Fiber Delivery together are referred to as the Fiber Delivery System or FDS.
Target Audience
This guide is for technical personnel involved in the selection, planning and
deployment of lasers and photonic equipment in laboratory and industrial
settings. The guide assumes a reasonable knowledge level of lasers, photonic
principles and electrical interface connectivity.
Chapters Inside
This guide includes the following chapters:
•
Chapter I “Description” — Describes the accessory including its general
operational principles, management and interfaces.
•
Chapter 2 “Installation” — Includes information and procedures on how to
correctly install the FDS.
•
Chapter 3 “Optical Alignment” — Information and procedures on how to align
the accessory output emission beam with a Fiber Delivery using a CONNECT.
•
Chapter 4 “Notes on Fiber Delivery” — Information on the selection and care
of the Fiber Delivery.