FF01/Rev.01/EN
Instruction Manual
FF01 Series Low Profile E-STOP Switches
We thank you for the recent purchase of our product. Please read the instructions carefully to ensure correct product use.
1.
Part No.
Poles
Actuator Size
Actuator Legend
Part Number
SPST
25.0 mm
Arrows
FF0116BACAEA01
SPST
30.0 mm
Arrows
FF0116BBCAEA01
SPST
25.0 mm
No Legend
FF0116BACEEA01
SPST
30.0 mm
No Legend
FF0116BBCEEA01
DPST
25.0 mm
Arrows
FF0126BACAEA01
DPST
30.0 mm
Arrows
FF0126BBCAEA01
DPST
25.0 mm
No Legend
FF0126BACEEA01
DPST
30.0 mm
No Legend
FF0126BBCEEA01
2.
Safety Precautions
・
Be sure to read the instruction manual and catalog before installation, wiring, operation, maintenance, or inspection of the product.
・
Confirm that the power is off before installation, wiring, maintenance, or inspections. Failure to do so may cause
electric shock,
fire, or malfunctions.
・
When the product is installed on other equipment, be sure that the usage is in compliance with all applicable standards and
regulations in the country or region as required for the system, machine, or facility.
3.
Cautions in Use
【
Before using the product
】
・
Do not use a power supply that exceeds the rated voltage or current indicated in the specifications. Using a power supply that
exceeds the ratings may cause overheating or fire.
・
Use wires of the appropriate rating. Use of improper wires may cause overheating and fire.
・
Follow the recommended Mounting Panel Cutout dimensions and installation instructions or the switch may come loose and not
operate properly.
・
Remove dirt and dust from the switch mounting surface of the panel before installation.
・
Do not disassemble the product because doing so may cause electric shock, fire, or malfunctions.
・
Operate the product by hand only. Do not operate using the feet, tools, or other objects.
・
Chattering and bouncing
Bouncing may occur during the reset operation (pull or turn to reset). Chattering may occur if the switch-mounted equipment is
subjected to shock or vibration. Take the appropriate precautions to prevent chattering and bouncing of the equipment.
・
Safeguard against excessive shock or vibration, such as dropping. Excessive shock and vibration may result in deformation, damage,
degraded performance, or failure.
