NK Medical Products, Inc.
Page 2
Rev 2 / 2009
FOR CRIBS SHIPPED FACTORY ASSEMBLED
:
TEST
each of the operational items before putting the crib into service
:
A)
Side Gates
A1)
Locking mechanism and lock positions
A2)
Operates smoothly
A3)
Adjust securing screws at the center and top of the slide rod for smooth opera-
tion of side gates.
B)
Vinyl Panels (if applicable)
B1)
Locking mechanism and lock positions.
B2)
Secured to corner.
C)
Crank mechanism should turn smoothly (gatch deck cribs)
C1)
Backrest panel should move freely.
C2)
Leg rest panel should move freely.
C3)
Manual leg rest support should be attached.
D)
Casters
D1)
Check the swivel feature.
D2)
Check the side brake
IMPORTANT: If at any time you have questions or concerns about the safe op-
eration of your NK crib, take unit OUT OF SERVICE and immediately contact
NK Medical Products for service instructions.
ANNUAL CRIB MAINTENANCE
⇒
Check to ensure that crib is free from tape and adhesives (especially on slide rods)
⇒
Check to ensure that deck handles are fully functional and handles are secure
⇒
Check to ensure that crib end caps are covering top corners, corner locks are screwed tight, casters
are secure, swivel and roll smoothly
⇒
Check to ensure that crib side gates operate smoothly; safety lock blocks (each end of top horizontal
square tube) are secure and offsets are pointing up; white slide rod guides (top and bottom of each
horizontal tube) are secure; handle assembly is secure and can only be squeezed when gate is lifted
for raising or lowering
