NJ CA-GB10, Instruction Manual

Page: 7 / 25

3) Ignition of the stove
1. Keep a match or a lighter lighted above the burner head.
2. Open the middle control valve to release and light the inner burner.
3. If the burner has not lit, turn off the control valve, waits 5 minutes and repeat step1.
4. When the burner is alight, open the other control valve to light other burners.
5. To turn the stove off: turn the cylinder valve or regulator switch to the OFF position
and then turn all control valves off.
WARNING
Never put your head or your body above the turned-on stove when you light it on or cook.
This dangerous behaviour may lead to fire, burn, serious injuries or death.
4) Use of the stove for cooking
1. Put food or liquid in a container (or kitchenware).
2. Put the kitchenware in the middle of the stove.
3. Turn the control valve to adjust the heat.
4. Please cleaning and maintenance it as well as the frequency of such tasks
5. Turn off the gas supply in the event of gas leak
6. The size of the cooking vessels to be used is from 20cm to 35cm.
7. When handling particularly hot components, it recommends using the protective
gloves.
WARNING
Never move a hot or turned-on stove. Switch the stove off and wait until it is cold more
than five minutes before moving it. To move a hot or turned-on stove may lead to f
ire,
burn, serious injuries or death.
Never use a kitchenware whose diameter is bigger than 9po.
Never group together one or many stoves. Never use any stove to heat empty or dry
pans. Never use any heat dispatcher from another supplier. Such a use of the stove may
lead to f
ire, burn, serious injuries or death.
Never use a kitchenware that is not right for the stove - especially the pan support
(convex or concave bottom, some enamelled kitchenware, etc.). The use of an unsuitable
kitchenware may lead to the instability of the utensil or the stove. They could fall over
rand lead to f
ire, burn, serious injuries or death.
The part sealed by the manufacture or his agent cannot be altered by the users.
Leak testing:
Leak test each time a new gas tank is connected or after a long period without having
used the appliance.
Make sure that the valve is in correct alignment with the venture.
Make sure that the hose has no cracking and splitting and is away from bottom casting
before each use.
IMPORTANT: if you cannot stop a gas leak, turn off the gas tank valve and call your local
gas tank dealer.
Perform this leak away from open flames or sparks and do not smoke!
1. Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid
with three parts water.
2. Make sure that all the control knobs are in OFF position.
7
ENGLISH