10
Basic Setup
1) Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also be used. A
HDMI cable is not included.
2) Connect the other end of the cable to the corresponding connector on your monitor.
3) Connect the power cable to your monitor then connect the other end to your power source. It is
recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached
directly.
4) Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
FreeSync is off by default. In order to use this feature, please note that you must have hardware with FreeSync capability,
a DP cable, and the latest graphics drivers. To use this feature, connect your computer and monitor with a DP cable. After
connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may
need to enable the function in the AMD Radeon Settings. You may also need to turn on the FreeSync setting in the
monitor’s OSD settings.
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source
has been detected.
