Instruction Manual
NivuLink Compact
page 38
NivuLink Compact - Document revision 02 / 06.08.2020
8 Installation
8.1 General Installation Information
Make sure to fulfil the requirements mentioned below:
•
Observe that the installation shall be carried out only by qualified expert
personnel
•
For electric installation follow the legal requirements of the according
country (in Germany: e. g. VDE 0100).
•
Observe further (local) statutory standards, regulations and technical rul-
ings.
•
Before feeding the rated voltage the installation must be completed. Verify
whether the installation is correct.
Important hints on installation
•
Ensure proper installation.
•
Follow applicable legal or operational guidelines.
•
Improper handling may lead to personal injuries and/or equipment damage
8.2 Hints on how to avoid electrostatic discharge (ESD)
When connecting the NivuLink Compact the following warnings and hints shall be observed
right as the warnings and hints found in the according chapters on installation.
WARNING
Danger of electric shock
•
Disconnect the instrument from mains power before you begin to carry out mainte-
nance, cleaning and/or repair works (expert personnel only).
The sensitive electronic components inside of the instrument may be damaged by static elec-
tricity which may impair the instrument’s performance or even lead to instrument failure. The
NIVUS GmbH recommends the following steps to avoid equipment damage due to electro-
static discharge:
•
Discharge static electricity from your body before touching the instru-
ment’s electronic components such as circuit boards and the components
installed on the boards. To do so touch a grounded metal surface such as
the unit’s enclosure frame or a metal pipe.
•
Avoid unnecessary movements to reduce the risk of building up static
electricity.
•
Transport statically sensitive components in antistatic containers or pack-
ing materials.