Technical Instructions for
Correlation Sensors
®
Correlation Sensors – Rev. 07 as of 20.04.2016
Page 13
2.6
Sensor Versions
The sensors are available in various constructions (wedge and pipe sensors)
and additionally vary in terms of Ex-Version, cable lengths, sensor connection
(cable end for direct connection or configured plug / plug-on filter element) as
well as various special versions and materials.
The article number can be found where the cable enters the sensor body as well
as on a nameplate on the end of the cable. This nameplate is protected against
weathering and abrasion by using a transparent shrunk-on hose.
Fig. 2-9
Type key for water-ultrasonic sensors, type CSM
CSM-
Type
Sensor with spatial allocation of flow velocities
V100
Without Level Measurement
KT
Wedge sensor made of PVDF; ground plate 1,4571
XX
Special construction
V1D0
mit Druckmesszelle
KT
XX
Special construction
Approvals (ATEX)
0
none
E
Ex zone 1
Cable Length
07
7 m
15
15 m (only type V1D0)
C
D
CSM-
Sensor Connection
Connection to electronic box, type
RD incl. pressure compensation
element
Connection to electronic box,
type RD
Wedge sensor made of PPO with PEEK
sensor face; ground plate 1.4571