Niviuk KLIMBER P, User Manual

Page: 7 / 24

7
calculated depending on the workload and aims to achieve the required
best performance with the least drag.
The lines are semi-automatically cut to length and all the sewing is
completed under the supervision of our specialists.
Every line is checked and measured once the final assembly is
concluded.
Each glider is packed following specific maintenance instructions as
recommended by the fabric manufacturer.
Niviuk gliders are made of premium materials that meet the requirements
of performance, durability and certification that the current market
demands.
Information about the various materials used to manufacture the wing
can be viewed in the final pages of this manual.
1.5 ELEMENTS AND COMPONENTS
The KLIMBER P is delivered with a series of accessories that will greatly
assist in the maintenance of the paraglider:
- A Kargo bag. This bag is large enough to hold all equipment
comfortably and with plenty of space.
- An inner bag to protect the wing during storage and transport.
- An adjustable compression strap to compress the inner bag and reduce
its volume.
- A repair kit with self-adhesive Ripstop tape in the same colour as the
wing and spare parts to protect the maillons.
2 . UNPACKING AND ASSEMBLY
2.1 CHOOSING THE RIGHT LOCATION
We recommend unpacking and assembling the wing on a training hill or
a flat clear area without too much wind and free of obstacles. It will help
you to carry out all the recommended steps required to check and inflate
the KLIMBER P.
We recommend the whole installation procedure is supervised by a
qualified professional instructor or official dealer. Only they can address
any doubts in a safe and professional way.
2.2 PROCEDURE
Take the paraglider out of the rucksack, open and unfold it on the ground
with the lines positioned on the undersurface, oriented in the direction of
inflation. Check the condition of the fabric and the lines for defects. Pay
attention to the maillons connecting the lines to the risers to make sure
they are fully closed and tightened. Identify, and if necessary untangle,
the A, B, C and the brake lines and corresponding risers. Make sure that
there are no knots.
2.3 CONNECTING THE HARNESS
Correctly connect the risers to the risers, ensuring that the lines are
correctly ordered and free of twists. Check that the carabiners are
properly fastened and securely locked.
2.4 HARNESS TYPE
The KLIMBER P can be flown with all current harness types, including
pod harnesses. We recommend the setting the chest strap to the
distance specified in the certification report - this will vary depending on
size.