User Manual
Proprietary & Confidential
Page 4
version 1.0
3. Operation of the Nivis Radio Modem
Communication with the NIVIS radio modem happens through serial port 2. The
baudrate is set to be 19200, 8N1.
3.1. Getting started
Open a terminal software on a serial port with the above settings and connect to the RF
modem. Any command is single line followed by enter command. Format of command
is: command param1 param2 … <enter>
At startup pushing the enter key a few times is necessary until the reception of the
prompt string.
PTS Commands description:
1. Clear screen
a.
Description
: clear screen
b.
Command name
: “cls”
c.
Parameters:
None
d.
Ex:
cls<enter>
2. Help
a.
Description
: display commands list and a short description of each
command
b.
Command name
: “help”
c.
Parameters:
None
d.
Ex:
help<enter>
3. Read ADC (ATD) channels
a.
Description
: read and display ADC channels values
b.
Command name
: “getadc”
c.
Parameters:
None
d.
Ex:
getadc<enter>
4. Get Modem SPI Register
a.
Description
: get value for a modem register (from page0)
b.
Command name
: “getreg”
c.
Parameters: 1
