User Manual
Proprietary & Confidential
Page 8
version 1.0
-
Max power hex format
d.
Ex:
iic_setpa FF<enter>
22. Set output pin in lo
a.
Description
: Set a pin as output and in lo state
b.
Command name
: “outlo”
c.
Parameters: 1
-
Pin
definition:
string: port and bit
d.
Ex:
outlo A5<enter>
23. Set output pin in hi
a.
Description
: Set a pin as output and in hi state
b.
Command name
: “outhi”
c.
Parameters: 1
-
Pin
definition:
string: port and bit
d.
Ex:
outhi A5<enter>
4. RF Exposure Limit Warning
To comply with FCC’s RF exposure limits for general population / uncontrolled
exposure, the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
5. Compliance Statement (Part 15.19)
This Device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
6. OEM Responsibility to the FCC Rules and Regulations
