Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 293
Click to clear only the currently selected client's counters.
Network / ACL Status
This page shows the ACL status by different ACL users. Each row describes the
ACE that is defined. It is a conflict if a specific ACE is not applied to the hardware
due to hardware limitations. The maximum number of ACEs is 256on each switch.
User
Indicates the ACL user.
Ingress Port
Indicates the ingress port of the ACE. Possible values are:
All:
The ACE will match all ingress port.
Port:
The ACE will match a specific ingress port.
Frame Type
Indicates the frame type of the ACE. Possible values are:
Any:
The ACE will match any frame type.
EType:
The ACE will match Ethernet Type frames. Note that an Ethernet Type
based ACE will not get matched by IP and ARP frames.
ARP:
The ACE will match ARP/RARP frames.
IPv4:
The ACE will match all IPv4 frames.
IPv4/ICMP:
The ACE will match IPv4 frames with ICMP protocol.
IPv4/UDP:
The ACE will match IPv4 frames with UDP protocol.
IPv4/TCP:
The ACE will match IPv4 frames with TCP protocol.
IPv4/Other:
The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.
IPv6:
The ACE will match all IPv6 standard frames.
