6
7KURWWOH/HYHU
9DOYH%RG\
&\OLQGHU
Fig.7
6. MAINTENANCE AND INSPECTION
When reshaping the edge of the chisel, apply water
sometimes so that it may not be heated too much.
7. THREAD SISE OF HOSE FITTING
The product comes with a metal-fitting with R
thread. Connect the Bushing R thread X NPT thread
included as standard accessories. If you would like
to have American NPT thread instead.
8. STORAGE
CAUTION
When tool is not used, store it out of reach of
children.
Avoid storing the tool in a location subject to high
humidity, if the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation, oil the tool at the air inlet
with machine oil ISO VG-10 and run it for a short
time.
9. ORDERING SERVICE PARTS
For further operational and handling information or
for replacement of parts and components, contact
the company from whom you purchased the tool or
an authorized dealer.
In ordering parts and components give each part
number, part name and quantity required.
Use only NITTO genuine parts.
10. OPTIONAL PARTS
The following chisels are available from ex-stock.
ACH-16
3DUW1R74
)ODW&KLVHO
3DUW1R74
)ODW&KLVHO
3DUW1R74
&XUYHG)ODW&KLVHO
Fig.8
CH-24
3DUW1R73
6WUDLJKW)ODW&KLVHO
PP
3DUW1R73
)ODW&KLVHO PP
Fig.9
ACH-16.indd 6
14.4.23 1:56:22 PM
