Nitto Seiko FEEDMAT FM5000 Series, Instruction Manual

Page: 69 / 84

Operation Box for Multi Spindle Screw Driving Machine 3. Setup function
33
3.6 Maintenance information function
This function is used to check machine maintenance information.
Main functions

Checking the touch panel battery type

Checking the PLC and touch panel (TP) version information
This function is used to check the touch panel battery type and software version information.
To change the display to the maintenance information screen, follow the procedure below:

SETUP screen
Touch the [MAINTENANCE INFO.] switch on the SETUP screen as shown above, to change the display
to the maintenance information screen.

MAINTENANCE INFO. screen

[TP BACK-UP BAT. TYPE]
This item is used to check the back-up battery type of this touch panel. When the battery
voltage is low, replace the “HG9Z-XR1 (IDEC)” battery of this type

[PLC Ver.]
This item is used to check the PLC software version information of this machine. If you
contact our information section for inquiry of the software version, you can smoothly get
information.

[TP Ver.]
This item is used to check the touch panel software version information of this machine. If
you contact our information section for inquiry of the software version, you can smoothly
get information.