5
INSTRUCTIONS FOR
THIS TOOL
About Your Tool
WARNING
●
Use of power is limited to the power source
specified by the rating plate.
●
Operate under the power source the voltage
fluctuating rate of which is within ±10 % of the
rated voltage, and the frequency of which is
50/60Hz of sinusoidal wave.
●
Before using the tool, make sure the power
source to which it will be connected is fitted
with an earth leakage breaker to prevent electric
shock.
●
Extension cord should be selected after ensuring
the diameter is compatible with the length of the
extension.
Beware of extremely long power cord (particularly
wound up thin cords) as they may cause drops in
voltage which weaken the magnetism, adversely
affecting the performance and function of the unit.
Do not share the extension cord with any other
electric machine tools.
Extension Cord
Max. Length
Nominal cross-sectional area
10 m
1.25 mm
2
or more
15 m
2.00 mm
2
or more
30 m
3.50 mm
2
or more
●
When performing maintenance, inspection,
replacement or adjustment of parts, make sure
to disconnect the attachment plug from the
receptacle.
●
To replace the Indexable Insert after using, do
not touch with bare hands as the Indexable
Insert and holder are heated at high temperature.
●
Use our original Indexable Inserts.
●
Do not use the worn or damaged Indexable
Insert.
●
If the unit is exposed under sub-zero temperature for
a prolonged period of time, it may take some time to
start up. This does not mean that the unit is broken.
Once the unit has warmed up, it can be used again.
1. USAGE
This tool is for chamfering workpieces with a Indexable
Insert.
2. CHECK THE CONTENTS OF THE PACKAGE
Check the contents and make sure that the tool does
not have any damage which may have occurred
during transportation. The contents should correspond
to the list as follows. In case of damage/missing
parts, please contact the sales agent from whom you
purchased the tool.
Package Contents
Qty Check
MINI BEVELER EMB-0307C
1set
Dust Box Ass’y
1set
Pan Head Screw 5
×
10
3
Carbon Brush Ass’y
1set
Hex. Socket Screw Key 4
1
Indexable Insert with hole 12.7
1
Indexable Insert Set Screw 4
×
7
1
Hex. Nut M8
2
Hex. Socket Set Screw 8
×
25 Special
2
Spanner T-15D
1
Instruction Manual
1
Declaration of Conformity
1
3. NAME OF PARTS
Adapter
Clamp Lever
Chamfering
Levels
Eccentric Ring
Scale to adjust
Chamfering angles
Plate Guide
Plate D
Lock Plate
Knob
Plate C
Lock Block
Head
Switch
Fig.1
4. PREPARATIONS
WARNING
●
Be Sure to turn the switch OFF and remove the
power plug from power supply whenever setting
up the tool.
4-1. Attaching the Dust Box
While pulling up the Dust Catcher in the arrow
direction as illustrated, tighten 3 pcs. of Pan Head
Screw 5
×
10 the Dust Box on the Head. (Fig.2)
