Nitto Kohki delvo DCC0241X-AZ, User Manual

Page: 13 / 28

11
EN
The following settings are available.
Details Setting value Default
- CH NAME Up to 50 double-byte characters (100 single-byte characters)
  If the CH name is changed, the [Installation] settings must be
updated. The CH name is saved in the robot, and is not reflected
in the controller.
-
1 SCREW FASTENING TYPE SOFT / HARD SOFT
2 COUNT 0 to 99 4
3 SCREW FASTENING
SPEED Lv1 to Lv9
  Cannot be input if [SCREW FASTENING TYPE] is [HARD].
Lv5
4 TORQUE 1% to 100% 30%
5 INITIAL SPEED OFF / Lv1 to Lv9 OFF
6 INITIAL SPEED TIME 0 / 0.01 sec to 9.99 sec*
1
0 / 1 to 60000*
2
  Cannot be input if [INITIAL SPEED] is [OFF].
0
7 MIDTERM SPEED OFF / Lv1 to Lv9 OFF
8 MIDTERM SPEED TIME 0 / 0.01 sec to 9.99 sec*
1
0 / 1 to 60000*
2
  Cannot be input if [MIDTERM SPEED] is [OFF].
0
9 REVERSE SPEED Lv1 to Lv9 Lv9
10 SCREW FASTENING
MEASUREMENT LOWER
LIMIT 0 / 0.01 sec to 9.99 sec*
1
0 / 1 to 60000*
2
0
11 SCREW FASTENING
MEASUREMENT UPPER
LIMIT 0 / 0.01 sec to 9.99 sec*
1
0 / 1 to 60000*
2
0
12 WORKPIECE SIGNAL OFF / ON OFF
13 WORKPIECE SETUP TIME 0 / 0.1 sec to 9.9 sec 0
14 SCREW FASTENING
OK(PASS) SIGNAL OFF / ON ON
15 OK(PASS) OUTPUT TIMING COUNT FINISHED / AT WORKPIECE REMOVAL
  Cannot be input if [WORKPIECE SIGNAL] is [OFF].
COUNT
FINISHED
16 SCREW FASTENING
CONFIRMATION TIME 0 / 0.1 sec to 9.9 sec
  Cannot be input if [COUNT RETURN] is [OFF].
0
17 OPERATION OK(PASS)
SOUND OFF / TYPE1 to TYPE9 TYPE1
18 OPERATION NG (FAIL)
SOUND OFF / TYPE1 to TYPE9 TYPE1
19 COUNT UP SOUND OFF / TYPE1 to TYPE9 TYPE1
20 AUTO REVERSE OFF / ON AFTER TORQUE UP / ON AFTER SCREW FASTENING
MEASUREMENT LOWER LIMIT OFF
21 REVERSE TIME 0 / 0.01 sec to 9.99 sec*
1
0 / 1 to 60000*
2
  Cannot be input if [AUTO REVERSE] is [OFF].
0
22 COUNT RETURN OFF / ONE COUNT ONLY / MULTIPLE COUNTS ONE
COUNT
ONLY
23 BIT BRAKE OFF / ON ON
24 REFASTENING
PROHIBITED TIME 0 / 0.1 sec to 9.9 sec 1.0 s
25 SCREWDRIVER LED OFF / RED / GREEN / BLUE / YELLOW / CYAN / MAGENTA /
WHITE OFF
26 SCREW FASTENING
DIRECTION RIGHT / LEFT RIGHT
*1 When the [MEASUREMENT METHOD] of the common settings is [TIME]
*2 When the [MEASUREMENT METHOD] of the common settings is [ROTATION SIGNAL]
TV08374-0̲URCaps̲en.indb 11 TV08374-0̲URCaps̲en.indb 11 2021/06/01 17:34:31 2021/06/01 17:34:31