6
5-1. For L-25 (Fig.2)
●
Mounting
After inserting the Chuck Pin in the Lock Ring, insert
the mandrel of the Mounted Wheel in the Chuck and
secure it by turning the Chuck Nut with the Spanner
14 in a clockwise direction. The Chuck Pin serves to
prevent rotation at this time.
●
Removal
Turn the Chuck Nut in a counterclockwise direction
with the Spanner 14 and withdraw the mandrel from
the chuck.
Fig. 2
5-2. For L-35 (Fig.3)
●
Mounting
Hold the body of the chuck with a Spanner 14 and
insert the Rotary Burr mandrel. Secure the Rotary
Burr by turning the Chuck Nut with another Spanner
14 in a clockwise direction.
●
Removal
Turn the Chuck Nut in a counterclockwise direction
with the Spanner 14 and withdraw the mandrel from
the chuck.
Fig. 3
5-3. For AL-55 (Fig.4)
●
Mounting
Insert a Spanner 7×9 into the groove in the end of
Body and insert the mandrel into the chuck. Secure
the it by turning the Chuck Nut with Spanner 7×9 in
a clockwise direction.
●
Removal
Turn the Chuck Nut in a counterclockwise direction
with the Spanner 7×9 and withdraw the mandrel
from the chuck.
Fig. 4
6. HOW TO OPERATE THE TOOL
WARNING
Always wear eye protection during operations.
Start the equipment. Then squeeze the equipment
lightly against the workpiece and move AIR SONIC in
the direction of the arrow, as shown in Fig. 5.
Strong push against the workpiece will not improve
working efficiency. Such strong push may cause
damage to the Mounted Wheel and the Rotary Burr.
Fig. 5
6-1. Start and Stop
●
For L-25, L-35 (Fig.6)
To start: Release the Lock Lever and grasp the
Throttle Lever.
To stop: Release the Throttle Lever.
Fig. 6
