Nitta PolySprint NPS-0310H1, Operation Manual

Page: 5 / 24

- 4 -
1 Safety Precautions- Continued-
Impressed voltage is distributed in the power cable and the control cable.
To prevent fire, electric shock or damage to the cable, please consider the
following:
・
Disconnect the main plug from the socket outlet with your hand.
・
Do not hang or carry the heat controller or the press by the power cable or
control cable. Always hold the press body and heat controller.
・
Do not remodel or replace the main plug.
・
Do not place any object on the power cable or the control cable.
・
Do not fold the power cable or the control cable.
・
Do not pull or stretch the power cable or the control cable.
・
Do not wrap the cable around the press and the controller.
Use a three-pin earth line as an extension cord.
When an extension cord is required, use an earth-connection type extension cord
to prevent electric shock.
To prevent fire or electric shock, do not use the PolySprint
™
Heat Press
under the following conditions:
・
Under flammable gas or combustible gas environment
・
Under a corrosive gas environment
・
Under an ambient temperature of 5
℃
or below
・
Under an ambient temperature of 40
℃
or above
・
Under a high humidity environment. (humidity surpassing 85%)
・
In places exposing the press to steam or water drops
To prevent electric shock, do not operate the PolySprint
™
Heat Press with
moistened hands.
Do not pour water on the PolySprint
™
Heat Press and do not get it wet.
Use of a wet press may cause fire or electric shock.
Use a dry cloth for cleaning the PolySprint
™
Heat Press. To
prevent fire, do not use alcohol, benzine, thinner or any other
inflammable solvent.
WARNIN
G
WARNIN
G
WARNIN
G
WARNIN
G
WARNIN G
WARNIN G