NiteSite batteries
3a
3a Scope mounted battery - The lithium-ion battery can be fitted on the scope sleeve during use.
The typical runtime for this product is 4 hours on half IR, depending on which product that it is
used with. The battery has a Velcro strap for mounting to the scope. Never take apart the
lithium-ion battery
3b Feed the Velcro strap through the strap points on both sides of the battery case, down one side
and up through the other side so that the Velcro strap is under the back of the battery. Place the
battery in position on the scope sleeve and feed the strap round the scope sleeve and through
the buckle. Now double back the Velcro strap under the scope sleeve and pull tight.
3b
Battery chargers
The battery charger comes with a compatible mains pin configuration for your region. To charge the
lithium-ion battery, the battery charger must be connected to the mains wall socket. Once the
green light is on simply connect the NiteSite lithium-ion battery pack DC plug into the charger DC
socket. The lithium-ion battery chargers green light will change to red. The red light indicates that
the battery is correctly connected and that the battery is being charged. The indicator light will
turn green once the lithium ion battery is fully charged.
Charging times will vary, depending on the type of battery pack and its charged condition. The
lithium-ion battery is supplied in a discharged condition and must be fully charged before use.
Always connect the correct lithium-ion battery charger to the correct lithium-ion battery supplied in
the kit. Please check you have the correct charger by checking the label located on the battery
charger. If in doubt please contact customer services
5
4000 mAh battery (XW)
6000 mAh battery (XE)
2000 mAh battery (XV)
