22
current mains.
6. Do not immerse the power cord, its plug, or the
device itself in water or any other liquid, so as to
avoid electric shock.
7. Do not leave the device unattended when it is on.
Unplug the device when you are not using it or prior
to cleaning.
8. Only use the device as described in this manual.
9. Do not touch the electric device if it has fallen into
water or has been flooded. Disconnect it from the
mains immediately.
10. Warning! During cleaning or operation, never
immerse any electrical parts of the device in water
or other liquids. Never immerse the device in water.
11. Never pull or carry the device by its power cord, do
not use the cord as a handle, make sure the cord
does not get caught in the door, and do not pull the
cord over sharp edges. Keep the power cord away
from hot surfaces.
12. Do not unplug the device by pulling on its cord. To
unplug it, grasp the plug, not the cord.
13. Do not touch the plug with wet hands.
14.
Caution! Risk of burns!
During operation, the device,
and in particular its nozzle and tips, heat up to very
high temperatures. Observe particular caution and
touch only the device handle during operation.
15. Always disconnect the device from the mains after
use and before cleaning.
16. If the device is hot, lean place it on the stand and lay
it on a heat-resistant surface. Never cover the hair
dryer with a towel, clothes, etc.
17. Do not attempt to open the housing or disassemble
any part of the device.
18. Keep the instruction manual and the packaging, if
possible.
19. When operating the device, always wear protective
Summary of Contents for POJM200280
