Joy of Flash Photography
TTL flash power compensation is provided in 7 steps by half Ev
increments for -1.5, -1.0, -0.5, 0, +0.5, +1.0, and +1.5 Ev.
To set the Flash power level select button to the power level you
desire.
When Di600 shows no level indication LED is turned on, the
flash power compensation level is at even (0 Ev) level as de-
fault value.
Take a picture and the aimed subject is shown with required
lighting effect by keeping the background exposure level as
originally expected.
Press the flash power select button, by each press of + marked
knob, it sets the power of +0.5
→
+1.0
→
+1.5 Ev. and the -
marked knob sets it to -0.5
→
-1.0
→
-1.5 Ev. The power level
indication lamp shows the power level you set.
On some cameras, the TTL flash power compensation setting is
provided in its menu mode. When setting the TTL flash power
compensation on your camera, any compensation which is also
set on the Di700 will be counted in addition to the compensation
you selected in the camera’s menu mode.
With the latest TTL flash control system, the
flash power level is always automatically
controlled by the camera for the most
appropriate exposure. If you wish, you can
soften or weaken the flash light, or give more
light to the subject without changing the
environmental or background exposure
effect. The Di600 can make it possible to
quickly adjust the exposure for each
partucular flash picture as needed.
TTL flash power compensation
10
On/Off
