© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
30
Bluetooth number next to the control housing (example):
Each system is assigned a unique Bluetooth number!
Information to the NISSEN radio remote control (Pro-Remote II)
The NISSEN radio remote control is equipped with a bi-directional communication to ensure that
instructions run only with
one
proper related and undisturbed remote control. Malfunction in radio
communication does not lead to a wrong selection of the system. The quality and the range of all radio
communications is highly depending on outside influences. Blinding, heat protection glazing in modern
vehicles and cabins can reduce the range considerably. The following aspects can cause malfunctions
in the radio communication or influence the range:airports with radio / radar systems near by
·
microwave radio relay distances
·
mobile phone masts or transmitters
·
radio equipment on or in the vehicle
·
special climatic conditions (fog, rain,etc.)
·
big constructions between system and remote control
·
electric or electronic systems (like winter road maintenance vehicles)
Due to the fact that radio interferences highly depend on outside influences all NISSEN radio remote
control units are equipped with an additional cable to alter the function of the remote control from radio
into cable.
3.5.9
Operating hours counter (optional)
Press key
[F1]
and choose "Info. Counter".
The following data is under "Info" - "Info. Counter" available:
Indication operating hours
Timer 1:
System connected to battery is switched off.
Timer 2:
System connected to battery is switched on
Timer 3:
System activated (lifted and lowered, not in standby mode).
Timer 4:
not assigned
Timer 5:
not assigned
Indication switching cycles
Counter 1:
System connected to battery is switched on.
Counter 2:
not assigned
Counter 3:
not assigned
Counter 4:
not assigned
Counter 5:
not assigned
NOTE!
The parameter "Operating hours counter" is only displayed on the remote control with integrated battery or
system guard and must be activated using a code!
Summary of Contents for VarioSign Series
Page 2: ......
Page 38: ......
Page 39: ......
Page 43: ...2017 Adolf Nissen Elektrobau GmbH Co KG Dimensions Variable Message Sign 43...