nissen Star-Flash LED 620A, Operating Instructions Manual

Page: 18 / 30

© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
ENGLISH
Star-Flash LED 620B/ 627B FÜQ
18
2.2 Safety
This section provides an overview of all important safety aspects for optimum protection of personnel and for safe and trouble-
free operation. Non-compliance with the handling instructions and safety instructions listed in this manual can lead to significant
danger.
2.2.1 Responsibility of the operator
The equipment is designed for use in the industrial sector. Consequently, the operator of the equipment is liable for the legal
obligations of safety at work. Apart from the safety at work instructions in these operating instructions, the safety, accident pre-
vention and environmental protection regulations in force for the field of application of the equipment must be observed.
In particular, the operator must:
•
inform himself of the applicable industrial safety regulations.
•
carry out a risk assessment to determine any additional dangers that result from the special working conditions at the place
of use of the equipment.
•
convert the necessary conduct requirements for operation of the equipment at the place of use into operating instructions.
•
regularly check that the operating instructions created by him are up to date with the current state of the regulations during
the entire period of use of the equipment.
•
update the operating instructions - as necessary - to new regulations, standards and operating conditions.
•
clearly delegate the responsibilities for installation, operation, maintenance and cleaning of the equipment.
•
ensure that all employees who are involved on or with the equipment have read and understood the operating instructions. In
addition, he must train the personnel at regular intervals in how to deal with the equipment and inform them of the possible
dangers.
•
provide the prescribed and recommended protective gear to the personnel charged with carrying out the work.
The operator is also responsible for ensuring that the equipment:
•
is always in a technically perfect condition.
•
is maintained according to the specified maintenance intervals.
•
and that all safety installations are checked regularly for completeness and functionality.
2.2.2 Personal requirements
2.2.2.1 Qualifications
WARNING!
Risk of injury due to insufficient qualification!
Improper handling can lead to considerable injury to personnel and damage to material.
For this reason:
•
Only allow activities to be carried out by suitably qualified personnel.
The following qualifications for different fields of activity are named in the operating instructions:
Instructed personnel
•
have been instructed by the operator on the tasks assigned to them and on the potential dangers of improper conduct.
Specialist personnel
•
are in a position to carry out the work assigned to them as a result of their technical training, know-how and experience as
well as knowledge of the current regulations and are able to independently recognise and avoid possible dangers.
Electricians
•
are in a position to carry out the work on electrical systems as a result of their technical training, know-how and experience
as well as knowledge of the current standards and regulations and to independently recognise and avoid possible dangers.
Electricians are trained for the specific place of use in which they are active, are trained and are familiar with the relevant
standards and regulations.
Only persons who can be expected to reliably carry out their work are sanctioned as personnel. Personnel whose ability to react
is affected, for example, by drugs, alcohol or medications will not be tolerated. When selecting personnel, observe the regulati-
ons regarding age and vocation-specific regulations applicable at the place of use.