![background image](http://html1.mh-extra.com/html/nissen/multi-light-cascade-220-led-l8h-670-1/multi-light-cascade-220-led-l8h-670-1_operating-instructions-manual_1695989016.webp)
© 2012 Adolf Nissen Elektrobau GmbH + Co. KG
ENGLISH
Multi-Light Cascade 220
17
Dip switches:
A 2-fold and a 4-fold dip switch block are arranged on the circuit boards of master and slave lamps
(Master/Slave). They are used to set different functions of the Multi-Light Cascade System.
Dip switch settings
S1
1-3 and
S2
must be made in all lamps individually.
The illustrated settings
S1/
1-3 are only used
for the
1-4-fold Multi-Light system They have no
effect on
the Multi-Light Cascade 220 system
The settings
S1/
1-3 for Multi-Light Cascade
220
are described in below image!
The settings
S1/
4 (day + night operation and
day off / night on)
are only made in the master lamp. Settings in
the slave lamps
are not necessary.
Default setting is day + night operation.
Dip switch S2 is available from version 1.3!
Dip switch S2 is used for setting the on-time.
50% = 500 ms on-time (default setting)
20% = 200 ms on-time
Dip switch configuration of S1/ 1-3
at a Multi-Light Cascade 220
factory setting according to lamp type
NOTE!
Settings of dip switches S1 and S2 are pre-set as described above.
The dip switch position must only be changed when a change of function is necessary.
The master lamp is connected to a rechargeable battery when all lamps are connected.
ATTENTION!
When connecting to a rechargeable battery take care that the terminals of the connection cable are in
compliance with the polarity!
Removal of the lens: