D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
52
54) [Auto-transmitting of Printer Status] « GS v NUL »
Code: [1D]h + [76]h + [00]h
Auto-transmits status when printer status changed.
* This command is only available to SERIAL interface.
* Status that will be transmitted is 1 byte. Refer to “Error Detection Details” for contents.
* Once the setting is done, it is effective until executing [Software Reset], reset switch
or turning the power OFF.
* This command is stored in internal reception input buffer and executes sequentially.
55) [Barcode Width Selection] « GS w n »
Code: [1D]h + [77]h + n
*[02
≤
n
≤
04]h
Selects horizontal size of barcode.
* Default value of “n” is [03]h
56) [Print Density Setting] « GS ~ n »
Code: [1D]h + [7E]h + n
*[41
≤
n
≤
87]h
Sets print density (MS2-7 OFF) in the range from 65% to 135%.
* Though “n” range is [41]h (65%) ~ [87]h (135%), set in the range of [41]h (65%) ~
[82]h (130%) in actual use.
* Default value of “n” is [64]h. Also, 100%, 125% are selectable by memory switch (MS2-7).
* Setting of this command has priority over setting by memory switch.
* When using this command while [Print Set/Finish Setting] command, the setting is
disregarded and DO NOT affect print density.
57) [Batch Setting of Japanese Kanji Print Mode] « FS ! n »
Code: [1C]h + [21]h + n
*[00
≤
n
≤
FF]h
Sets print modes of Japanese Kanji all at once.
* “n” has the following meaning.
Value
Bit Function
0 1
0 Undefined
1 Undefined
2 Double
width
RESET
SET
3 Double
height
RESET
SET
4 Undefined
5 Undefined
6 Undefined
7 Underline
RESET
SET
* When setting double height and double width at the same time, quadruple character
will be formed.
* All of the printed characters will be underlined except for the 90º clockwise rotated
characters and spaces created by [Horizontal Tab] command.
* Underline width is determined by the value set in [Japanese Kanji Underline
SET/RESET].
Default value is 1dot width.
* Different sizes of characters mixed such as normal size, double height, double width
and quadruple can be printed.
* Combined print with ANK Character is also available.
* Default value of “n” is [00]h.
