D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
22
4.1.2 Memory Switch MS2
Default
Setting
Function O
N
OFF
NP-2411D
NP-3411D
NP-2411U
NP-3411U
MS2-1
Japanese Kanji Code
Shift JIS
JIS
OFF
OFF
MS2-2 OFF
OFF
MS2-3
Built-in language
font switching
Refer to table 3
OFF OFF
MS2-4
Near end detection
No effect
Effect
OFF
OFF
MS2-5 Reserve
OFF
OFF
MS2-6 Reserve
OFF
OFF
MS2-7 Print
area
69(54)mm
*2
72(52)mm
*2
OFF OFF
MS2-8 Print
density
Dark
Standard
OFF
OFF
*Setting of MS2-5 and MS2-6 must be “OFF” at normal operation.
*2: Figures in ( ) will be applied for NP-2411
Table 3: Built-in language font
Japanese
Korean Chinese Greek
MS2-2
OFF
OFF
O N
O N
MS2-3
OFF O
N OFF O
N
*Japanese JIS C 6226:
Full size
Katakana character set, Extended graphic character set, Code Page 858, Int’l character: Half size
*Korean KS X 1001:1992:
Full size
Katakana character set, Extended graphic character set,Code Page 858: Half size
(KS X 1001:1992 built-in font)
*Chinese GB18030-2000:
Half / Full size
*Greek Code Page1253:
Full size (Character code is 1byte code)
*Please refer to [Character Code Table Selection] for other language font.
4.1.3 Memory Switch setting by manual
Firstly, make sure that paper is set and printer is ready for feeding paper when setting (or
changing) memory switch configuration manually. Then, follow the switch operation
mentioned below. Printer automatically prints out new setting contents and activates
software reset before new setting becomes effective.
(1) How to shift to setting mode
Head cover: closed
FEED switch: ON
Turn ON the power with above statuses.
After a complete activation of printer, open the head cover and close it again.
Then, turn OFF the FEED switch.
Next, it will prints out beginning with “**MEMORY SW SETTING MODE**” to enter into
setting mode. Finally, ALARM LED (red) will blink.
